3x300mm2 Copper XLPE Power Cable

The electric cable is applied to transmit and distribute power in power transmission and distribution system of 35kV or lower. It is widely adopted in the fields including power, construction, mines, metallurgy, petrochemical industry and communication in complete replace of oil immersed paper insulated power  cable and in partial re-place of PVC insulated power cable.

XLPE Power Cable

1. Standard of XLPE Power Cable:
According to GB12706( Equal to IEC60502)Also can do by standard of ASTM,BS,DIN and AS/NZS or other standards as request.

2. Rated Voltage of XLPE Cable:
0.6/1KV 6/10KV;8.7/15KV;12/20KV;18/20KV;21/35KV;6/35KV

3. Construction of XLPE Power Cable:
Conductor:Copper or Aluminum
Insulation:XLPE
Inner sheath:PVC or PE
Armoured:Galvanized steel tape,Galvanized steel wire
Outer Sheath:PVC or PE

NO. of cable cross: 1 core(Single core),2cores(Double cores),3cores, 4cores(4 equal-section-area cores OR 3 equal-section-area+1 small section area neutral core),5cores(5 3 equal-section-area cores+2 small area neutral cores OR 4 equal-section-area +1 small area neutral cores).We provide armored type and non-armored type for the cables stated above.
Also can do according to the customer's request.

4. Characters of XLPE Cable:
a.Max Long-time operating temperature of XLPE insulated power cable is 90°C
b.Installing temperature of cable should not be less than 0°C
c.Max short-circuit temperature is not exceed 250°C,Not more than5 Sec.
d.Unable be laid without the limit of fall with enough mechanical pull,Single core cable can not be laid in iron tube or fixed by circled iron tools around cables

3x300mm2 Copper XLPE Power Cable

Type & Designation

Type	Description	Applications
YJV YJLV	Cu or AL conductor XLPE insulated PVC sheathed power cables.	For laying indoors, in tunnels, in ducts. Able to bear extermal mechanical force but not large pulling forces. Single core cables are impermissible to be laid in magnetic ducts.
YJY YJLY	Cu or AL conductor XLPE insulated PE sheathed power cables.
YJV22  YJLV22	Cu or AL conductor XLPE insulated PVC sheathed internal steel tape armoured power cables.	For laying indoors, in tunnels, in ducts and underground. Able to bear extermal mechanical force but not large pulling forces, Impermissible to use single core cable in A.C circuit.
YJY23 YJLY23	Cu or AL conductor XLPE insulated PE sheathed internal steel tape armoured power cables.
YJV32  YJLV32	Cu or AL conductor XLPE insulated PVC sheathed internal steel wire armoured power cables.	For laying in areas along route with large difference of elevation, in shafts and in water, able to bear a corresponding pulling forces and external mechanical forces.
YJY33 YJLY33	Cu or AL conductor XLPE insulated PE sheathed internal steel wire armoured power cables.

 
Description& Application of XLPE POWER Cable 

TYPE		NAME	Main Application
CU core	AL core
YJV/YJY	YJLV/YJLY	XLPE insulated,PVC/PE sheathed power cable	For laying indoor ,tunnel,canal and underground.Unable to bear external mechanical forces,but bear the traction force during laid
YJV22/YJV23	YJLV22/YJLV23	XLPE insulated,steel tape armored,PVC/PE sheathed power cable	For laying indoor ,tunnel,canal and underground.Able to bear external mechanical forces,but unable to bear large pulling force
YJV32/YJV33	YJLV32/YJLV33	XLPE insulated,thin steel wire armored,PVC/PE sheathed power cable	For laying in shaft,water underground will large difference of level.Able to bear external mechanical forces and moderate pulling force
YJV42/YJV43	YJLV42/YJLV43	XLPE insulated,thick steel wire armored,PVC/PE sheathed power cable	For laying in water and seabed.Able to bear positive pressure and pulling force

33kv Copper XLPE Power Cable
Advantage:
 
a. Excellent electric and mechanical characteristics
b. Best Resistance chemical corrosion and heat-ageing,environment stress and flame-retardant
c. Simple in structure,Convenient to use
d. Reduce costs
 
Rated Voltage,Core Numbers & Nominal Cross-section Area:

Uo/Um(kv)	1st class	0.6/1	1.8/3	3.6/6
No. of Core	2nd class	1/1	3/3	6/6
1 core	section area(mm2)	1.5-800	25/800	25-800
2 core	section area(mm2)	1.5-185	/	/
3 core	section area(mm2)	1.5-400	25-400	25-400
4 core	section area(mm2)	2.5-400	25-400	/
5 core	section area(mm2)	2.5-400	25-400	/

Cable Properties
Special features which we can offer for MV cables:
* Watertight construction (both radial and longitudinal).
* Lead sheath available for options.
* Resistant to heavy vibration.
* Available in long delivery lengths to reduce number of joints.
* Corrosion-free screen area.
* Copper or aluminum conductor up to 2500mm².
* Metallic sheath and radial moisture barrier made of copper wire or tape.
* Different options for outer PE jackets (LDPE, MDPE & HDPE).
* Different options for LSF, LSZH & FRPVC, being anti-termite or UV resistant as per BS 7835, IEC 60332 etc.
* Strippable insulation screen.
* Metallic screen made of multiple layers of copper tapes or a combination of copper wires and tapes to increase the earth fault current carrying capacity.
* Increased armour conductivity by insertion of hard drawn copper wires in armour.

More to visit our website:   www.xlpepowercable.com